Puppet Server: Running From Source

This version of Puppet Server is not included in Puppet Enterprise. The latest version of PE includes Puppet Server 2.7. A newer version is available; see the version menu above for details.

So you’d like to run Puppet Server from source?

Before we get started, let’s highlight a few gotchas that might save you some time. The things that you are most likely to run into trouble with are pretty much the same things that were tricky about running the Webrick server from source:

  • Knowing where your confdir/vardir/codedir are
  • Knowing what your certname is
  • Making sure that your certname is resolvable

In Puppet Server, we always specify /vardir/codedir explicitly in the Puppet Server config. This way, they are never dynamically determined based on your user or anything magical like that. So, if you need to know where they are, look at your config file(s).

Your certname comes from facter fqdn or puppet.conf, just like it does in Webrick. If facter fqdn returns something that is not resolvable, you’re gonna have a bad time. Either set your certname explicitly in /puppet.conf, or put `facter fqdn` into your /etc/hosts.

The following steps will help you get Puppet Server up and running from source.

Step 0: Quick Start for Developers

# clone git repository and initialize submodules
$ git clone --recursive git://github.com/puppetlabs/puppetserver
$ cd puppetserver

# Remove any old config if you want to make sure you're using the latest
# defaults
$ rm -rf ~/.puppetserver
# Copy the sample repl utilities namespace
$ cp dev/user.clj.sample dev/user.clj

# Launch the clojure REPL
$ lein repl
# Run Puppet Server
user=> (go)
user=> (help)

You should now have a running server. Your confdir is set to ./target/master-conf; see ~/.puppetserver/puppetserver.conf to examine this and other default paths.

In another shell, you can run the agent:

# Go to the directory where you checked out puppetserver
$ cd puppetserver
# Set ruby and bin paths
$ export RUBYLIB=./ruby/puppet/lib:./ruby/facter/lib
$ export PATH=./ruby/puppet/bin:./ruby/facter/bin:$PATH
# Create the modules directory for the production environment, to avoid the
#  annoying module error during pluginsync
$ mkdir -p ./target/master-code-dir/environments/production/modules
# Run the agent
$ puppet agent --no-daemonize --debug --trace --verbose \
     --confdir ./target/master-conf-dir \
     --vardir=./target/master-var-dir \
     --server `facter fqdn` --onetime

NOTE that the default config is not ideal for long-lived dev environments, because it sets codedir, confdir, and many other things to live inside of ./target. This directory WILL BE COMPLETELY REMOVED any time you run a lein clean, so if you’ve been setting up any modules / manifests in there, you’ll lose your work. It’s much better to create a longer-lived home for these files. To do that, you just need to edit the settings in your puppetserver.conf file. More details below.

Also, I generally prefer to use separate confdir and vardir settings for my master and agent, because otherwise it’s super confusing to try to guess which one of them touches which files otherwise. To use separate conf/vardirs between master and agent on Puppet Server, you just need to:

  • Choose one set of directories for the master via puppetserver.conf
  • Choose a different set of directories for the agent via CLI args or puppet.conf’s [agent] section
  • Use a different certname for the master than for the agent. (I usually put certname=localhost into my master’s puppet.conf file, use a different confdir for the agent, and do --server localhost on the CLI for my agent runs. This also has the pleasant side effect of not needing to jack with /etc/hosts/facter fqdn for the master.

More detailed instructions follow.

Step 1: Install Prerequisites

Use your system’s package tools to ensure that the following prerequisites are installed:

  • JDK 1.7 or higher
  • Leiningen
  • Git (for checking out the source code)

Step 2: Clone Git Repo and Set Up Working Tree

$ git clone git://github.com/puppetlabs/puppetserver
$ cd puppetserver
# initialize git submodules (which are located in ./ruby, and contain the
#   puppet/facter ruby source code)
$ git submodule init
$ git submodule update

Step 3: Set up Config Files

Choose a directory outside of the git working copy, e.g. ~/.puppetserver, where you’d like to maintain local config files for development. Then, copy the file dev/puppetserver.conf.sample to that directory, and name it puppetserver.conf. Edit it to suit your needs. A few notes:

  • Relative paths in the config file refer to the root directory of the puppetserver git working copy.
  • Puppet Server reads much of its configuration data from puppet.conf and Puppet’s usual confdir. The setting master-conf-dir may be used to modify the location of the Puppet confdir. Otherwise, it will use the same default locations as Puppet normally uses (~/.puppet for non-root users, /etc/puppet for root).
  • Similar to confdir, you will likely want to specify the other top-level Puppet directories codedir, vardir, rundir, and logdir.

You probably don’t need to make any changes to the sample config for your first run, but the settings that I edit the most frequently are:

  • jruby-puppet.master-conf-dir: the puppet master confdir (where puppet.conf, modules, manifests, etc. should be located).
  • jruby-puppet.master-code-dir: the puppet master codedir
  • jruby-puppet.master-var-dir: the puppet master vardir
  • jruby-puppet.master-run-dir: the puppet master rundir
  • jruby-puppet.master-log-dir: the puppet master logdir
  • jruby-puppet.max-active-instances: the number of JRuby instances to put into the pool. This can usually be set to 1 for dev purposes, unless you’re working on something that involves concurrency.

If you prefer, you may break the individual configuration sections from puppetserver.conf into multiple .conf files, and place them in a conf.d-style directory.

Step 4a: Run the server from the clojure REPL

The preferred way of running the server for development purposes is to run it from inside the clojure REPL. The git repo includes some files in the /dev directory that are intended to make this process easier.

When running a clojure REPL via the lein repl command-line command, lein will look for a namespace called user.clj on the classpath, and if one is found, it will load that namespace by default. We provide a sample version of this namespace that is tailored for use with Puppet Server. To use it, simply do:

$ cp dev/user.clj.sample dev/user.clj

The git repo contains a .gitignore for dev/user.clj, so each user can customize their user namespace to their liking.

Once you’ve made a copy of the user.clj file you’ll want to edit it. It contains some comments explaining the contents of the file. The main change you’ll want to make is to edit the puppetserver-conf function to your liking; you’ll probably just want to change it so that it points to the path of the puppetserver.conf file that you created in step 3.

Running the server inside of the clojure REPL allows you to make changes to the source code and reload the server without having to restart the entire JVM. It can be much faster than running from the command line, when you are doing iterative development. We are also starting to build up a library of utility functions that can be used to inspect and modify the state of the running server; see dev/user_repl.clj for more info.

(NOTE: many of the developers of this project are using a more full-featured IDE called Cursive Clojure, built on the IntelliJ IDEA platform, for our daily development. It contains an integrated REPL that can be used in place of the lein repl command-line command, and works great with all of the functions described in this document.)

To start the server from the REPL, run the following:

$ lein repl
nREPL server started on port 47631 on host 127.0.0.1
user=> (go)
user=> (help)

Then, if you make changes to the source code, all you need to do in order to restart the server with the latest changes is:

user-repl=> (reset)

Restarting the server this way should be significantly faster than restarting the entire JVM process.

You can also run the utility functions to inspect the state of the server, e.g.:

user-repl=> (print-puppet-environment-states)

Have a look at user_repl.clj if you’re interested in seeing what other utility functions are available.

Step 4b: Run the server from the command line

If you prefer not to run the server interactively in the REPL, you can launch it as a normal process. To start the Puppet Server when running from source, simply run the following:

$ lein run -c /path/to/puppetserver.conf

Other useful commands for developers:

  • lein test to run the clojure test suite
  • rake spec to run the jruby test suite

Installing Ruby Gems for Development

Please see the Gems document for detailed information on installing Ruby Gems for use in development and testing contexts.

Debugging

For more information about debugging both Clojure and JRuby code, please see Puppet Server: Debugging documentation.

↑ Back to top